How To Add A Zone To An Existing Sprinkler System

If you want to add a zone to an existing sprinkler system, you will need to purchase a zone kit. Once you have the kit, you will need to connect the new zone’s PVC pipe to the main water supply line and run it to the desired location. You will then need to install the new zone’s sprinkler heads and connect them to the PVC pipe. Finally, you will need to program the new zone into the sprinkler system’s controller.

1 Steps to Add A Zone To An Existing Sprinkler System

If you want to add a zone to an existing sprinkler system, the first thing you need to do is determine where the new zone will be located. Once you have found the location, you need to measure the distance from the existing system’s main line to the new zone’s location. Next, you need to cut a length of pipe that is equal to the distance you measured. After you have cut the pipe, you need to attach it to the main line using fittings. Finally, you need to install a valve in the new zone’s line.

If you want to have a well-maintained lawn, it is important to learn how to add a zone to an existing sprinkler system. By doing this, you will be able to water your lawn more efficiently and prevent any dry spots from developing. In addition, adding a zone to your sprinkler system can also help you save money on your water bill.

Step 1: Adding A Zone To An Existing Sprinkler System Is A Process That Can Be Completed By Following A Set Of Simple Steps The First Step Is To Identify The Area Of The Yard That You Would Like To Add A Zone To Once The Area Has Been Identified, The Next Step Is To Locate The Valves For The Existing Sprinkler System Once The Valves Have Been Located, The Next Step Is To Determine How Many New Sprinkler Heads Will Be Needed

Adding a zone to an existing sprinkler system is a process that can be completed by following a set of simple steps. The first step is to identify the area of the yard that you would like to add a zone to. Once the area has been identified, the next step is to locate the valves for the existing sprinkler system. Once the valves have been located, the next step is to determine how many new sprinkler heads will be needed.


Frequently Asked Questions

Can You Add A Zone To Existing Sprinkler System?

Yes, a zone can be added to an existing sprinkler system.

Do You Need A Valve For Each Sprinkler Zone?

Valves are used to control the water flow to each sprinkler zone. Each zone will need its own valve so that the zone can be turned on or off as needed.

Can You Run 2 Sprinkler Zones At The Same Time?

Yes, you can run 2 sprinkler zones at the same time.

Do I Need A Sprinkler Check Valve?

A sprinkler check valve is not required but is recommended. Check valves help to prevent backflow of water from the sprinkler into the water supply line.

To Review

To add a zone to an existing sprinkler system, first find the valves for the new zone and unscrew the cap. Next, connect one end of the new pipe to the valve and the other end to the sprinkler head. Finally, screw the cap back on and turn on the water.

Leave a Comment

Your email address will not be published. Required fields are marked *