How To Add Easy Close Drawer Slides

Adding drawer slides is a fairly easy process that can be done with a few simple tools. The type of slides you need will depend on the weight and size of your drawer, as well as the materials from which your cabinet is made. There are also different types of drawer slides, including side mount, bottom mount, and concealed.

How To Add Easy Close Drawer Slides

There are a few different ways that you can add easy close drawer slides to your cabinets. One way is to purchase a kit that comes with the slides and all of the hardware that you need. Another option is to buy the slides separately and install them yourself. If you choose this option, you will need to measure the space inside of your cabinet where the drawer will be installed and purchase the correct size slides. The third option is to have a professional installer put the slides in for you

-Tape measure -Plywood -Ruler or a straight edge -Circular saw -High-grit sandpaper -Stiles -Construction adhesive -Cordless drill -1 inch hole saw -Paint or a sealant -Drawer slides

  • Purchase easy close drawer slides that are slightly smaller than the drawer’s width and height
  • Attach the drawer slides to the inside of the drawer’s front and back panels
  • Measure the drawer’s width and height

– drawer slides are a key component to any easy close drawer system – there are many different types and brands of drawer slides available on the market – it is important to select the correct type and size of drawer slide for your application – some factors to consider when selecting drawer slides include the weight of the drawer contents, the width of the drawer opening, and the height of the cabinet or shelf – it is also important to allow for enough space between the back of the drawer and


Frequently Asked Questions

Can I Add Soft Close To Existing Drawers?

Adding soft close to drawers is a relatively easy process, and can be done with a few simple tools. First, remove the existing drawer pulls and screws. Next, measure the width and depth of the drawer, then cut the soft close drawer slides to those dimensions. Finally, install the drawer slides by screwing them into the sides of the drawer box and replacing the drawer pulls.

Can You Add Drawer Slides To Existing Drawers?

Yes, you can add drawer slides to existing drawers.

Can You Add Sliders To Drawers?

Yes, it is possible to add sliders to drawers. This allows you to easily open and close the drawer by sliding it back and forth.

How Do I Make My Existing Drawers Soft Close?

You can make your existing drawers soft close by adding drawer slides that have a built-in dampener. This will ensure that your drawers close gently and quietly.

How Much Does It Cost To Add Drawer Slides?

It typically costs around $10 to add drawer slides to a piece of furniture.

Can You Replace Drawer Slides On Old Cabinets?

Yes, drawer slides can be replaced on old cabinets, but it is a challenging and time-consuming process. The cabinet must be emptied and all of the drawer slides must be removed before the new slides can be installed. There are many different types and sizes of drawer slides, so it is important to find the right ones for your cabinet. Once the new slides are in place, the drawers must be reinstalled and tested to make sure they open and close properly.

How Hard Is It To Install Soft Close Drawer Slides?

Installation of soft close drawer slides is not a difficult task. It is important to read the installation instructions carefully, as there are specific steps that must be followed in order for the slides to work properly.

How Do I Convert My Kitchen Drawers To Soft Close?

There are a few ways to convert your kitchen drawers to soft close. You can buy a kit that converts your drawer slides to soft close, or you can buy soft close inserts that fit inside your drawer. You can also make your own inserts using foam or cork.

How Do You Add Slides To An Existing Drawer?

To add slides to an existing drawer, open the drawer and click the “Create Slide” button in the toolbar.

How Do You Install Drawer Slides In An Existing Cabinet?

There are a few ways to install drawer slides in an existing cabinet. The first is to remove the cabinet doors and drawer fronts, then measure and mark where the slides will go. Drill pilot holes and attach the slides with screws. Another way is to remove the cabinet drawers and measure and mark where the slides will go. Drill pilot holes and attach the slides with screws or nails. If there is a false front on the cabinet, you can also install the drawer slides from the inside.


In Closing

Adding drawer slides is a simple process that can be completed in a few minutes. It is important to measure the space inside the drawer and the cabinet to ensure that the correct size slides are purchased. The slides should be installed according to the manufacturer’s instructions.

Leave a Comment

Your email address will not be published. Required fields are marked *