How To Change S Trap To P Trap

Changing a s-trap to a p-trap is a relatively simple process that can be completed in a few minutes. The most important part of the process is ensuring that all of the connections are tight and watertight. To change a s-trap to a p-trap, first remove the old trap by unscrewing it from the drainage pipe. Discard the old trap and wash the drainage pipe with hot, soapy water. Next, fit the

How To Change S Trap To P Trap

A sink’s trap can be easily converted from a S-shaped trap to a P-shaped trap with a few basic tools. The S-shaped trap is generally used in residential applications, while the P-shaped trap is more commonly used in commercial applications. The main difference between the two traps is that the P-shaped trap has a larger diameter, which allows for a greater flow of water. To convert a S-shaped trap to a P-shaped trap, you will

-Tape measure -Pipe wrench -Pipe cutter – hacksaw -PVC primer -PVC cement – PVC pipe (two inch) -S trap

  • Unscrew the shower head from the shower arm
  • Screw on the ptrap to the shower arm, making sure that it is tight reattach the shower head to the
  • Remove the slip nut from the shower arm

1. Ensure that the pipe diameter is large enough to accommodate the p-trap. 2. Cut the pipe at the appropriate location and remove the s-trap. 3. Install the p-trap and ensure that it is properly seated. 4. Seal any open connections with plumber’s putty or caulk.

Frequently Asked Questions

Why The S-Trap Is Not Good?

The S-trap is not good because it is difficult to clean and it can be a breeding ground for bacteria.

Is A Vented S-Trap Ok?

A vented S-trap is an appropriate option for a sink drain.

What Is An S-Trap Good For?

An S-trap is a type of plumbing fixture used in drains and wastewater systems. It is a curved pipe that forms a “S” shape, with the opening of the S facing downwards. The S-trap is used to trap debris and solid objects that may be in the wastewater before it flows down the drain.

In Closing

There are a couple of ways that you can change a S-trap to a P-trap. One way is to cut the pipe below the sink and install a coupling and then install the P-trap. Another way is to cut the pipe below the sink and install a 90 degree elbow and then install the P-trap.

Leave a Comment

Your email address will not be published. Required fields are marked *