The wax ring is a critical part of the toilet that helps to create a seal between the toilet and the drain pipe. If this seal is broken, the toilet may start to leak. To change the wax ring, you will need to remove the toilet from the floor. This can be a challenging task, so it is best to have some experience with plumbing before attempting this project. Once the toilet is removed, you can replace the wax ring and reattach the toilet to the floor.
How To Change Wax Ring In Toilet
If your toilet is leaking and you have determined that the wax ring is the culprit, you will need to replace it. The process is not difficult, but it can be a little messy. Here are the steps you need to take: 1. Shut off the water supply to the toilet. 2. Flush the toilet and remove as much water from the bowl as possible using a plunger. 3. Disconnect the water supply line from the bottom of the
-Toilet -Wax Ring -Screwdriver -Pliers -Tape measure -New wax ring
- Turn off the water to the toilet by turning the valve on the wall behind the toilet. flush the toilet to release as much water as possible
- Remove the bolts from around the bottom of the toilet with a wrench
below: -Remove the toilet seat -Lift off the tank -Use a putty knife to pry the old wax ring from the flange -Clean the flange and place a new wax ring on it -Put the tank back on and screw it in place -Replace the toilet seat
Frequently Asked Questions
How Do I Know If The Toilet Wax Ring Needs Replacing?
The toilet wax ring needs to be replaced if the toilet starts to wobble or if there is water leaking around the base of the toilet.
How Long Do Toilet Bowl Wax Rings Last?
The life of a toilet bowl wax ring can depend on how often the toilet is used and how well it is maintained. A well-maintained toilet with only occasional use can last for up to 10 years. However, a toilet that is often used or not properly maintained may need a new wax ring every year or two.
How Do You Remove An Old Wax Ring From A Toilet?
Removing an old wax ring from a toilet is a fairly simple process. First, shut off the water to the toilet and flush it to remove as much of the old wax ring as possible. Then, use a putty knife to pry the old ring off of the toilet flange. Finally, clean the flange and replace the old ring with a new one.
In Summary
The best way to change a wax ring in a toilet is to follow the manufacturer’s instructions. Most manufacturers recommend that the old ring be removed and the new one installed before the toilet is reassembled.