How To Clean Trailer Wiring Plug

Trailer wiring is a system of electrical connectors that allow trailers to be connected to the towing vehicle. It is a very important system, as it allows the trailer to be signals such as brake lights, turn signals, and running lights. The connector on the trailer end is called the plug. The connector on the towing vehicle is called the socket. There are several ways to clean a trailer wiring plug. The most common way is to use a wire brush. Another way

How To Clean Trailer Wiring Plug

The first step in cleaning a trailer wiring plug is to remove the plug from the socket. This can be done by pulling on the plug or by using a screwdriver to pry the plug from the socket. Once the plug is removed, it can be cleaned with a brush or a rag. The next step is to clean the socket with a brush or a rag. Once the plug and socket are clean, they can be reattached and used.

-wire brush -soap and water -bucket -clean rags

  • Locate the trailer wiring plug on your trailer
  • Dry
  • Wash the plug with soap and water to remove any dirt or grime
  • Detach the plug from the trailer by unscrewing it

1. Clean the plug with a wire brush. 2. Clean the terminals with a wire brush. 3. Apply a light coating of petroleum jelly to the terminals. 4. Connect the plug to the trailer wiring connector. 5. Tighten the screws on the plug connector.

Frequently Asked Questions

Can I Use Wd40 On Trailer Plug?

Yes, WD-40 can be used on trailer plugs. It is a lubricant and can help to keep the plug working smoothly.

How Do You Keep Trailer Plugs From Corroding?

One way to prevent corrosion on trailer plugs is to keep them clean and dry. You can also use a corrosion inhibitor to protect the plugs from the elements.

What Do You Spray In Trailer Plugs?

Penetrating oil and spray lubricant are common things used to spray in trailer plugs. This helps to keep them from corroding and makes it easier to remove them when needed.


The best way to clean a trailer wiring plug is to use a small brush and some soapy water. Be sure to rinse the plug off with water when you are done.

Leave a Comment

Your email address will not be published. Required fields are marked *