How To Clock A Gas Meter

Most people know how to read a clock, but do you know how to clock a gas meter? Clocking a gas meter means to take a reading of the dials on the front of the meter. This is something that you should do once a month in order to keep track of your gas usage.

How To Clock A Gas Meter

There is no one definitive way to clock a gas meter. However, some methods are more accurate than others. One common way to clock a gas meter is to time how long it takes for a certain amount of water to flow through the meter. Another way is to use a stopwatch to time how long it takes for the meter to register a certain amount of gas. Whichever method is used, it is important to be consistent in order to get accurate results.

-Tape measure -Phillips head screwdriver -Permanent marker -Pencil -Ruler or a straight edge -Level

  • Locate your gas meter
  • Typically on the exterior of your home
  • Find the clock handle on the meter it will be near the bottom to rotate the hands, hold the clock handle between your thumb and first 2 fingers

There are a few ways to clock a gas meter. One way is to use a stopwatch and time how long it takes for the gas meter to run 10 gallons. Another way is to use a gas meter reading tool, which can be found at most hardware stores. The reading tool will calculate the cubic feet of gas used and convert it to dollars and cents.


Frequently Asked Questions

How Do You Calculate Gas Meter Clock?

To calculate the gas meter clock, you first need to find the reading on the gas meter. Next, divide the number by 1440 (the number of minutes in a day) to find out how many minutes have passed since the meter reading. Finally, add this number to the current time to find out the estimated time of the next meter reading.

What Do The Dials Mean On A Gas Meter?

The dials on a gas meter measure how much gas the household is using. They go from 0 to 9. The first dial measures up to 100 cubic feet, the second dial measures up to 1,000 cubic feet, and the third dial measures up to 10,000 cubic feet.

What Dial Should Be Used To Clock A Gas Meter?

Dial A is typically used to clock gas meters, though other dials may be used as well.


In The End

To clock a gas meter, one needs to measure the revolutions of the gas meter’s disk over time. This can be done with a simple stopwatch.

Leave a Comment

Your email address will not be published. Required fields are marked *