Cedar logs are not difficult to cure, but there are a few things to keep in mind. The most important part of curing cedar logs is to make sure the moisture content is low enough that the logs will not rot.
How To Cure Cedar Logs
To cure cedar logs, you will need to first cut them into smaller pieces. Then, you will need to seal the ends of the pieces with a sealant. Finally, you will need to place the pieces in a dry area and allow them to cure for several months.
-Cedar logs -Stain -Paintbrush -Paint -Saw
- Cut the logs to the desired length
- Rinse the logs and allow them to dry
- Apply a sealant
- Soak the logs in a water/borax mixture for a few days
-If you are looking to cure cedar logs, there are a few things you will need to do. -First, you need to cut the logs into smaller pieces that will fit into your curing container. -Then, you will need to treat the wood with a preservative. This can be done with a commercially available product or with a homemade solution. -Finally, you will need to store the logs in a location where they can dry out slowly.
Frequently Asked Questions
How Long Can Cedar Logs Sit Before Milling?
Cedar logs can sit for an indefinite period of time before milling, but the wood will eventually lose its quality.
Should Logs Dry Before Milling?
The drying process is important to the overall quality of lumber. Kiln drying is the most common method, but air drying is also an option. Lumber that is not dried properly will warp, shrink, and cup after it is milled.
How Do You Air Dry Cedar Logs?
There is no one definitive way to air dry cedar logs. Methods can vary depending on the size and moisture content of the logs, as well as the climate and humidity levels in the surrounding area. Some common methods include stacking the logs in a sunny spot, wrapping them in burlap or another material that will allow airflow, and drilling holes in the logs to improve air circulation.
To keep your cedar logs healthy and bug-free, you will need to apply a sealant or coating every few years.