How To Dig Under Concrete Sidewalk

If you need to get under a concrete sidewalk, one way to do it is by digging a hole. Start by measuring the width and length of the hole you need to dig. Then, use these measurements to calculate how deep the hole should be. You will also need to factor in the depth of the concrete sidewalk. Once you have determined how deep the hole needs to be, use a shovel to start digging. Be sure to make the sides of the hole straight so that the concrete sidewalk

How To Dig Under Concrete Sidewalk

The best way to dig under a concrete sidewalk is to use a jackhammer. First, mark the area where you want to dig with stakes or flags. Then, use the jackhammer to chisel away at the concrete until you have a hole big enough to fit through. Wear safety goggles and a dust mask when using a jackhammer to avoid getting injured by flying debris.

Tools: -Shovel -Sledgehammer -Measuring Tape -Pipe wrench -Chisel -Hammer Materials: -Concrete -Sand

  • Take care to avoid any underground utilities or cables
  • Using a shovel, start digging at one end of the sidewalk and work your way towards the other end
  • If you encounter any large rocks or tree roots, try to

-Check for underground utilities before beginning excavation. -Use a hand shovel to loosen the soil around the concrete. -Break up the concrete with a sledgehammer. -Use a crowbar to pry up the pieces of concrete. -Remove any debris from the excavation site. -Use a shovel to fill in the excavation site with soil.


Frequently Asked Questions

How Do You Tunnel Under A Sidewalk?

The most common way to tunnel under a sidewalk is by digging a trench. The trench should be wide enough to accommodate the workers and the equipment, and deep enough so that the workers can safely work below the surface of the sidewalk. Once the trench is dug, the workers will install temporary or permanent supports for the sidewalk, then dig a tunnel underneath.

Can You Dig Under A Concrete Slab?

You can dig under a concrete slab by using a jackhammer to break up the concrete and a shovel to remove the debris.

How Do You Dig A Drainage Trench Under A Sidewalk?

You might use a shovel or a pickaxe to dig a drainage trench under a sidewalk.


In Summary

One way to dig under a concrete sidewalk is to use a jackhammer. First, mark the area where you want to dig with spray paint or flags. Next, use a jackhammer to break up the concrete. Be sure to wear safety goggles and a dust mask while using the jackhammer. Once the concrete is broken up, use a shovel to remove the pieces.

Leave a Comment

Your email address will not be published. Required fields are marked *