There are a few different ways to find rafters under shingles. One is to use a metal detector. Another is to use a stud finder.
How To Find Rafters Under Shingles
There are a few ways to find rafters under shingles. One is to use a metal detector. Another is to use a stud finder.
-A hammer -A saw -Rafters
- Check if the roof needs repair: look for missing, broken, or curling shingles. water should run off the roof smoothly. if there are any problems, fix them before looking for rafters
-Check to see if the roof sheathing is even and flush. If it’s not, you’ll need to add more sheathing or rafters. -Look for any evidence of water damage, such as rotting roof decking or sheathing, water staining, or mold. -If you see any of these problems, you’ll need to repair them before installing new shingles. -If the roof has a gable end, make sure the rafters
Frequently Asked Questions
Can A Stud Finder Read Through Shingles?
A stud finder can be used to find the studs in a wall, even if there is a layer of shingles on top. The stud finder sends out a signal that detects the edges of the studs, and can penetrate through a layer of shingles.
How Do I Find My Roof Joists?
The easiest way to find your roof joists is to go into your attic and look for the beams that run perpendicular to the roofline. These are likely your roof joists.
Can You Use A Stud Finder On The Roof?
Yes, you can use a stud finder on the roof.
Rafters are the structural members of a roof that extend from the top of the exterior walls to the ridge beam or apex of the roof. They are usually spaced at 16 inches on center and covered with roofing material, such as asphalt shingles. To find rafters under shingles, look for the roof trusses or rafter ties, which are usually located at the eaves and ridge of the roof.