How To Fix Cracked Polycrylic

Polycrylic is a water-based acrylic finish that is often used on furniture, cabinets, and trim. It is available in both a matte and a glossy finish. Polycrylic can be easily damaged, especially if it is not protected from scratches and scuffs. A cracked or chipped polycrylic finish can be repaired by using a touch-up kit.

How To Fix Cracked Polycrylic

There are a few ways to fix a cracked polycrylic coating. One way is to use a hot glue gun to apply a thin line of glue over the crack. Be sure to use a low-temperature glue gun, as high-temperature glue can damage the polycrylic. Another method is to use a sealant or epoxy specifically designed for repairing plastics. If neither of these methods works, the only option may be to remove the old polycrylic and reapply

– Sandpaper – Clear polycrylic sealant – Paintbrush

  • Clean the area around the crack with a damp cloth
  • Press the pieces together and hold until the glue dries
  • Apply a small amount of wood glue to the crack

-If the polycrylic is still wet, you can try to fix it by rubbing it with a cloth or paper towel. -If the polycrylic is dry, you can try to fix it by using a solvent such as acetone or nail polish remover. Be sure to test the solvent on an inconspicuous spot first to make sure it doesn’t damage the finish. -If neither of those methods work, you can try sanding the cracked area and then

Frequently Asked Questions

Will Polycrylic Crack?

Polycrylic is a water-based acrylic sealant that is known for its durability and long-lasting finish. It is often used on furniture, floors, and other surfaces to provide protection from scratches, spills, and everyday wear and tear. While polycrylic is generally a very durable sealant, it can occasionally crack if it is exposed to too much moisture or if it is applied in thick layers.

What Causes Polyurethane To Crackle?

Polyurethane may crackle when it is first applied because of the difference in temperature between the coating and the substrate. The application of a polyurethane coating may also cause cracking if the substrate is not completely dry.

Is Cracked Polyurethane A Problem?

No, cracked polyurethane is not a problem. It can be repaired with a sealant or adhesive.


To fix a cracked polycrylic finish, use a touch up pen in the color of the finish to match. Fill in the crack with the pen, and then polish with a soft cloth.

Leave a Comment

Your email address will not be published. Required fields are marked *