How To Fix Unlevel Inground Pool

In order to fix an unlevel inground pool, first use a level to identify which side is low. Next, use soil to raise the low side until it is level with the rest of the pool. Finally, use a trowel or shovel to smooth out the soil around the pool.

How To Fix Unlevel Inground Pool

There are a few ways that you can fix an unlevel inground pool. One way is to use a leveling compound to fill in the low spots. This will help to bring the pool level. Another way is to add pool sand to the low spots. This will help to raise the level of the pool. You can also use a pump to move water from the high spots to the low spots. This will help to make the pool more level.

-leveling tool -pulleys -chain -tape measure – Shovel – Rake – Wheelbarrow – Tamper

  • Add or remove dirt as needed to achieve a level surface
  • Compact the surface of the pool with a hand tamper or by driving over it with
  • Use a rake or shovel to even out the surface of the pool

– Pool leveling is typically a process that is done to adjust the height of an in-ground pool. – This is often done if the pool appears to be unlevel, or if one side of the pool is noticeably lower than the other. – There are a few different ways that you can go about leveling your pool, and the best way to do it will depend on the specific situation. – Some things that you may need to take into account when leveling


Frequently Asked Questions

Can An Inground Pool Be Leveled?

Yes, an inground pool can be leveled. By adding or removing dirt or rocks around the outside edge of the pool, it is possible to adjust the level of the water.

How Do You Fix An Unlevel Pool Without Draining It?

There are a few ways to fix an unlevel pool without draining it. One way is to add water to the high side of the pool until it is level. Another way is to use a levelling compound to fill in the low spots.

How Do You Relevel An Inground Pool?

There are a few ways to re-level an inground pool. One way is to use a screw jack to adjust the height of one end of the pool until it is level. Another way is to add or remove water from the pool until it is level. A third way is to use shims under the legs of the pool ladder to adjust the height until the pool is level.


To Review

If you are finding that your inground pool is not level, there are a few things you can do to fix the problem. First, try using a pool level to get the water surface in the pool as close to level as possible. If the water surface is still not level, you can add or remove water from the pool until it is. You can also adjust the slope of your pool’s liner to help correct the unlevelness.

Leave a Comment

Your email address will not be published. Required fields are marked *