How To Install A Chlorinator On A Well

A chlorinator is a device used to inject chlorine into water in order to disinfect it and remove any contaminants. It is important to install a chlorinator on a well in order to ensure the water is safe to drink.

How To Install A Chlorinator On A Well

Installing a chlorinator on a well is a fairly simple process. The first step is to identify the location of the chlorinator on the wellhead. Next, remove the cap from the top of the chlorinator and insert the plug into the hole. The next step is to attach the pipe coming from the pump to the inlet connection on the chlorinator. Finally, tighten the clamp on the pipe to secure it in place.

-Chlorinator -Hose -Wrenches -Teflon Tape

  • Turn off power to the well pump at the breaker box
  • Replace the well cap. restore power
  • Screw the chlorinator onto the top of the well pipe
  • Remove the well cap

-Consider the location of the chlorinator on the well. -The type of chlorinator to be installed. -The size of the chlorinator. -The depth of the well. -The amount of chlorine to be added to the water.


Frequently Asked Questions

What Does A Chlorinator Do For A Well?

A chlorinator is a device used to add chlorine to a water supply, such as a well. Chlorine is added to help control bacteria and other contaminants in the water.

How Do You Use A Well Chlorinator?

A well chlorinator is a device used to inject chlorine into a well water system in order to disinfect the water and prevent bacterial growth.

What Does A Well Chlorinator Do?

A well chlorinator is a device that is used to add chlorine to a well water system in order to maintain sanitary conditions and reduce the risk of water-borne illnesses.


In Summary

If you have a well and would like to install a chlorinator, there are a few simple steps you need to follow. First, you will need to purchase or borrow a water pump. You will also need to purchase a chlorinator and some PVC piping. Once you have all of the supplies, you can begin by drilling a hole in the side of your well near the top. The hole should be big enough for the PVC piping to fit through. Next, you will need to connect the chlorinator to the water pump and PVC piping. Finally, you can put the water pump in the well and turn it on. The chlorinator will automatically start pumping chlorine into the water.

Leave a Comment

Your email address will not be published. Required fields are marked *