Installing a hand held shower diverter is a relatively easy process that can be completed in just a few minutes. The first step is to remove the old shower head and arm from the shower pipe. Next, insert the shower arm coupler onto the shower pipe and tighten it down with a wrench. Then, attach the new shower head and arm to the coupler and tighten it down. Finally, attach the hand held shower hose to the new shower head and you’re ready to
How To Install Hand Held Shower Diverter
There are a few ways to install a hand held shower diverter. The first is to remove the old showerhead and attach the hand held shower hose to the shower arm. The second is to use a diverter valve, which will allow you to use either the hand held shower or the regular showerhead. The third is to use a slide bar, which will attach to the wall and hold the hand held shower hose.
-Wrench or Pliers -Tape Measure -Phillips Screwdriver -Pipe Wrench -Channel Locks -Screws -Silicone Caulk -Handheld Shower Head
- Disconnect the old shower diverter from the shower arm
- Unscrew the shower head from the shower arm
- Thread the new shower diverter onto the shower arm screw on the new shower head
-Check the water pressure in your home by checking the water pressure gauge on your main water line. It should read 40 to 50 psi. If it doesn’t, you may need to call a plumber to increase the pressure or install a pressure-boosting pump. -Shut off the main water supply to your home by turning off the valve on the main water line. -Open up the shower valve by rotating it counterclockwise until it’s in the open position.
Frequently Asked Questions
How Do You Install A Handheld Shower Valve?
Installing a handheld shower valve is a relatively easy process that can be completed in a few simple steps. First, shut off the water supply to the shower by turning the valve located under the faucet. Next, remove the old showerhead by unscrewing it counterclockwise. Finally, install the new handheld shower valve by screwing it into place clockwise. Be sure to tighten it securely to avoid any leaks. Once installed, turn on the water supply and test the handheld showerhead.
How Do You Install A Shower Diverter Valve?
Installation instructions for a shower diverter valve vary depending on the make and model of the valve, but in general, the process is fairly simple. Shut off the water supply to the shower and remove the old valve. Install the new valve according to the manufacturer’s instructions, then turn on the water and check for leaks.
How Do You Install A Hand Held Shower Diverter?
A hand held shower diverter can be installed by attaching it to the shower arm with a nut and then tightening it with a wrench. The diverter can then be attached to the hose of the hand held shower.
Taking Everything Into Account
The hand held shower diverter is a great way to add flexibility to your showering experience. It is easy to install and can be done in minutes.