How To Install Wall Hung Toilet

A wall hung toilet is a toilet that is attached to the wall instead of being seated on a pedestal. This type of installation can be useful in smaller bathrooms or powder rooms where space is at a premium. The installation process for a wall hung toilet is not difficult, but does require some basic plumbing skills.

How To Install Wall Hung Toilet

Wall hung toilets are very popular in many countries for their modern look and space-saving design. They are becoming more and more popular in the United States, as well. Although they may seem intimidating to install, a wall hung toilet is really not much different from a regular toilet. Here is a guide on how to install a wall hung toilet: 1. Shut off the water supply to the bathroom by turning off the valve behind the toilet. Flush the toilet to drain all

-Wall hung toilet -Tape measure -Level -Paint or a permanent marker -Drill -1 inch hole saw -Circular saw -Jigsaw -Plywood -Construction adhesive -Caulking gun -Toilet flange bolts -Lumber screws -2 inch screws -5 inch screws -1 inch nails -Hammer -Chisel –

  • Drill pilot holes into the studs secure the mounting bracket to the wall with screws
  • Check that the wall can support the weight of the toilet
  • Find the studs in the wall and mark their location

-Wall hung toilets can save space in a small bathroom by freeing up floor space. -They are also easier to clean because the entire unit is suspended from the wall. -To install a wall hung toilet, you will need to first remove the old toilet and disconnect the water supply. -Then, use a level to mark where the toilet will be installed on the wall. -Drill holes in the wall at the marks and secure the mounting brackets with anchors.

Frequently Asked Questions

How Do You Install A Wall-Mounted Toilet?

Wall-mounted toilets are typically easier to install than floor-mounted toilets because there is no need to connect the toilet to the plumbing system. The first step is to mark the location of the toilet on the wall and then use a drill to make pilot holes. Next, use a level to ensure the toilet is installed level, and then drill mounting holes into the wall. Finally, use screws to attach the toilet to the wall.

Are Wall Hung Toilets Easy To Install?

Wall hung toilets are easy to install because they come with a pre-installed mounting plate that is attached to the wall.

How Much Does It Cost To Install A Wall Mounted Toilet?

The cost of installing a wall mounted toilet can vary depending on the type of toilet, the complexity of the installation, and the region. However, on average, it costs between $150 and $350 to install a wall mounted toilet.


Installing a wall-hung toilet is a relatively easy process that can be completed in just a few hours. The first step is to remove the old toilet and disconnect the water supply line. The flange and bolts that held the old toilet in place should also be removed. The new toilet can then be installed by following the manufacturer’s instructions. The water supply line should be reconnected, and the toilet should be tested for leaks.

Leave a Comment

Your email address will not be published. Required fields are marked *