How To Installing Ditra Around Toilet Flange

Installing Ditra around a toilet flange is a relatively simple process that can be completed in a few hours. The first step is to remove the old flooring and toilet. The next step is to cut the Ditra to size and attach it to the subfloor using thinset mortar. The final step is to install the new flooring and toilet.

How To Installing Ditra Around Toilet Flange

Installation of Ditra around a toilet flange is a relatively simple process. The first step is to cut the Ditra mat to size, using a sharp utility knife. The mat should be cut so that it is slightly larger than the flange itself. Next, place the Ditra mat in position around the flange, ensuring that it is securely in place. If necessary, use a hammer and chisel to help secure it in place. Then,

-1. level surface 2. tape measure 3. utility knife 4. straight edge 5. pencil 6. circular saw 7. hammer 8. chisel 9. handsaw 10. drill with a 1/2″ bit 11. hacksaw 12. screwdriver 13. adjustable wrench 14. hammer drill or rotary hammer 15. bucket or container for mixing mortar 16. whisk broom 17. trowel

  • locate the toilet flange 2. mark the location of the toilet flange on the subfloor 3. cut a piece of ditra
  • Mat that is at least 3″ wider and longer than the

– remove the toilet and check the flange for damage – if there is damage, repair it before installing the Ditra – lay a layer of mortar on the floor around the flange – make sure that the mortar is even and at least 1″ thick – place the Ditra over the mortar, making sure that it is centered over the flange – press it into the mortar so that it is flush with the floor – reinstall the toilet and check for any

Frequently Asked Questions

How Close Should Tile Be To Toilet Flange?

The tile should be close enough to the toilet flange so that the flange is covered by the tile.

Should The Toilet Flange Be Flush With Tile?

There is no definitive answer to this question as it depends on the preferences of the individual homeowner and the specifics of the installation. In some cases, it may be preferable to have the flange flush with the tile in order to create a more seamless look. However, if there is a gap between the flange and the tile, it can be difficult to keep the area clean and free of debris.

Should Toilet Flange Be Flush With Finished Floor?

Flooring contractors generally recommend that the toilet flange be installed so that the top of the flange is level with, or slightly recessed below, the finished floor surface. This is to ensure that water does not accumulate around the base of the toilet and cause damage to the flooring.


Installing Ditra around a toilet flange is a relatively quick and easy process. The main thing to keep in mind is to make sure that the Ditra is properly aligned with the toilet flange before securing it in place.

Leave a Comment

Your email address will not be published. Required fields are marked *