Laying baseboard on an uneven floor can be a tricky task. There are a few things you can do to make it a little easier. First, use a level to find the highest point on the floor. Measure the height of that point and subtract 1/4 inch from it. This is the height you will want your baseboard to be at. If the floor is particularly uneven, you may want to add an extra inch or two to this measurement. Once you have your measurement
How To Lay Baseboard On Uneven Floor
If the floor is uneven, you will need to use a spacer between the baseboard and the floor. This can be a piece of wood or a shim. You may also need to use a level to make sure the baseboard is level.
-Tape measure -Plywood or MDF board -Circular saw -Ruler or a straight edge -High-grit sandpaper -Stiles -Construction adhesive -Cordless drill -1 inch hole saw -Paint or a sealant -Baseboard molding
- Measure the height of the floor at each corner of the room
- Nail the baseboard in place
- Adjust the height of the baseboard so that it is even with the floor in all areas
below -Measure the height of the floor at several points, and subtract the height of the baseboard you want from each measurement. This will give you the width of each section of baseboard you need. -Cut each section of baseboard to length, using a miter saw or handsaw. -Position each section of baseboard against the wall, and mark where it needs to be cut to fit against the floor. -Use a handsaw or jigsaw to cut
Frequently Asked Questions
Should Baseboard Be Level Or Follow The Floor?
Baseboard should follow the floor, as it is more aesthetically pleasing and less likely to cause a tripping hazard.
Do Baseboards Have To Be Level?
No, baseboards do not have to be level. In fact, it is often difficult to make them perfectly level, and doing so can actually look unnatural. Instead, aim to make them as level as possible and use a vertical trim piece to hide any unevenness.
Should Baseboards Sit On Floor?
Baseboards may sit on the floor or may be slightly elevated. There is no one, correct answer; it depends on personal preference and the look you are going for.
In Summary
Baseboard molding can be used to cover an uneven floor, creating a finished and polished look. A thin piece of wood, baseboard molding is easy to install and can be cut to fit any size or shape. Before installing the baseboard, use a level to ensure that the surface is even. If it is not, use a hammer and chisel to even out the surface. Once the surface is even, attach the baseboard molding using nails or screws.