# How To Measure An Arch Window

Window arches can be difficult to measure accurately, as they are not always perfectly symmetrical. The following guide will help you measure the height and width of an arch window accurately.

## How To Measure An Arch Window

When measuring an arch window, one must first measure the width of the window opening at the top. Next, one must measure the height of the opening from the floor to the top of the arch. Finally, one must measure the depth of the opening from the inside edge of the trim to the outside edge of the trim.

-Tape measure -String or ribbon -Pencil -Ruler

• Measure the width of the window on that side
• Measure the height of the window on that side
• Mark the halfway point on both
• Use a level to draw a horizontal line on one side of the window

Window arches can be difficult to measure because they are not always a perfect semicircle. To get an accurate measurement, you will need to measure the height, width, and depth of the arch. You should also measure the thickness of the window frame, and add that amount to your measurements.

### How Do You Measure For Window Arch Trim?

Window arch trim is typically measured in two ways: the height of the trim and the width of the trim. The height of the trim is measured from the bottom of the trim to the top of the trim, while the width of the trim is measured from one side of the trim to the other side of the trim.

### How Do I Know What Size My Blinds Are?

Window blinds are typically measured in width by length, in inches. To determine the size of your blinds, measure the width and length of your window opening and write those measurements down. When you go to purchase your blinds, match those measurements to the size options offered by the retailer.

### How Do You Measure Arch Blinds?

There are a few ways to measure arch blinds. One way is to measure the window opening at the widest point and then subtract 1 1/2 inches to get the width of the arch blind. Another way is to measure the window opening at the height of the arch and then add 2 inches for the width of the blind.

## Taking Everything Into Account

An arch window can be measured by using a level and a ruler or tape measure. One side of the window opening should be marked at the top and bottom, and then the level should be used to find the midpoint. The ruler or tape measure can then be used to measure from the midpoint to the top and bottom marks on the side of the opening.