How To Mix Thoroseal

Thoroseal is a water-based, asphalt emulsion sealant used to waterproof and protect concrete and other masonry surfaces. Thoroseal can be applied by brush, roller, or spray and is typically used to seal around windows, doors, and other openings where water infiltration is likely. Thoroseal dries to a tough, flexible membrane that resists weathering and cracking.

How To Mix Thoroseal

Thoroseal is a concrete sealant that is used to waterproof and protect concrete surfaces. It is a water-based, acrylic emulsion that can be applied with a brush, roller, or sprayer. Thoroseal cures to a tough, flexible membrane that resists weathering, abrasion, and staining. It is available in white or black and can be used on horizontal or vertical surfaces. Before applying Thoroseal, the surface should be clean and free

-Thoroseal is a sealant and adhesive used to repair cracks in concrete. -It can also be used as a waterproofing agent on roofs, basements, and other surfaces. -Thoroseal comes in a variety of colors, and can be tinted to match the color of the concrete. -A trowel -A putty knife -A drill with a mixer attachment

  • Mix thoroseal with water using a ratio of 1:1 by weight
  • Stir the mixture until it is well blended
  • Paint the mixture onto the surface to be sealed. allow the thor

– Thoroseal should be mixed in a clean container using a stirring paddle. – The recommended ratio is one part Thoroseal to six parts clean water. – Thoroseal should be mixed well until it reaches a uniform consistency. – The mixed Thoroseal should be applied using a brush, roller, or sprayer.


Frequently Asked Questions

How Long Does Thoroseal Take To Cure?

Thoroseal is a concrete sealant that cures in 24 hours.

How Do You Mix Thoroseal Waterproofing?

Thoroseal is a commercial waterproofing product that can be applied to both interior and exterior surfaces. It is a quick-drying, solvent-based sealant that is typically used to waterproof concrete, masonry, and metal. Thoroseal can be applied with a brush, roller, or sprayer, and it cures to a hard, glossy finish.

How Many Coats Of Thoroseal Are There?

Thoroseal is a watertight sealant used to coat roofs and other surfaces to prevent water infiltration. The number of coats required will depend on the condition of the surface and the intended use of Thoroseal. typically, two coats are applied.


In Closing

Thoroseal is a waterproofing material that can be used on both interior and exterior surfaces. It can be mixed with water or latex paint to create a coating that will protect against moisture and weathering. Thoroseal is easy to apply and can be used on a variety of surfaces.

Leave a Comment

Your email address will not be published. Required fields are marked *