How To Put A Drain In A Cooler

This guide is about how to install a drain in a cooler. This is a very simple process and can be completed with basic tools in a short amount of time.

How To Put A Drain In A Cooler

There are a few ways to put a drain in a cooler. One way is to drill a hole in the bottom of the cooler and attach a garden hose fitting. Another way is to cut a hole in the side of the cooler and attach a spigot.

-Tape measure -Pipe cutter -Pipe wrench -Hacksaw -Teflon tape -PVC primer -PVC cement -Cooler -Drill -1 inch hole saw

  • Cut a piece of pvc pipe to fit the hole
  • Glue the pvc pipe in place insert a drainage plug into the pipe
  • Drill a hole in the bottom of the cooler

-Choose a cooler that is large enough to fit the drain kit -Drill a hole in the bottom of the cooler that is the size of the drain kit -Insert the drain kit into the hole and tighten the screws -Measure and cut a piece of tubing to fit from the drain kit to the nearest sink -Attach the tubing to the drain kit and tighten the clamps -Turn on the cold water and run the tubing up to the sink -Open


Frequently Asked Questions

How Do You Put A Drain On The Bottom Of A Cooler?

To put a drain on the bottom of a cooler, you can purchase a cooler with a drain or cut a hole in the bottom of your cooler and attach a hose.

Can You Install A Drain Plug In A Cooler?

Yes, you can install a drain plug in a cooler. This will allow you to easily and efficiently drain water from the cooler.

How Do I Fix My Cooler Drain?

If your cooler drain is clogged, you can try to clear it with a wire hanger or another long, thin object. If that doesn’t work, you may need to pour a pot of boiling water down the drain to clear it out.


Wrap-Up

By following the steps outlined in this tutorial, you can easily put a drain in a cooler. This will allow you to easily empty the cooler of water and ice, as well as keep it clean.

Leave a Comment

Your email address will not be published. Required fields are marked *