How To Remove An Old Wax Ring

If you’re dealing with a plumbing emergency and there’s water spilling out from beneath your toilet, the first thing you need to do is to stop the flow of water. Once the water is turned off, you can then begin to remove the old wax ring. The wax ring is responsible for creating a tight seal between the toilet and the drain pipe. If it’s no longer effective, water can leak out from beneath the toilet. To remove the old wax ring, you

How To Remove An Old Wax Ring

There are a few ways to remove an old wax ring. If the ring is still in good condition, one can simply break it off and remove it. If the ring is broken or damaged, a new one will need to be installed. The easiest way to do this is by using a toilet auger. The auger will help remove the old wax ring and any remaining debris.

-toilet plunger -old towels or newspapers -bucket -scrub brush

  • Remove the bolts on the bottom of the toilet that hold it in place
  • Lift the toilet off of the flange and set it aside remove the old wax ring from the flange
  • Remove the toilet seat

There are a few ways to remove an old wax ring. One way is to use a chisel to break the ring into smaller pieces, and then use a screwdriver or putty knife to pry it out. Another way is to use a vacuum cleaner with the hose attachment to suck the ring out.

Frequently Asked Questions

Do You Need To Remove Old Wax Ring?

Yes, you need to remove the old wax ring before installing a new one. The old ring may be cracked or damaged, which could cause a leak.

How Do You Get Old Ring Out Of Toilet?

There is no one definitive answer to this question. Some possible methods include using a plunger, using dish soap, using vinegar, and using a wire hanger.

Do You Need To Replace Wax Seal After Removing Toilet?

Replacing a wax seal is not always necessary after removing a toilet. If the seal was removed carefully and there is no damage to it, then it can be re-used. However, if the seal was damaged or removed improperly, then it must be replaced.

In Closing

Removing an old wax ring is a fairly straightforward process. First, remove the toilet seat and set it aside. Next, unscrew the bolts that attach the toilet to the floor. Gently rock the toilet back and forth to break the seal and then lift it off of the floor. Finally, carefully scrape away any remaining wax from the flange and dispose of it in the trash.

Leave a Comment

Your email address will not be published. Required fields are marked *