There are a few ways to remove a brass ring from a copper pipe. One way is to use a hammer and chisel to break the ring off. Another way is to use a hacksaw to cut the ring off.
How To Remove Brass Ring From Copper Pipe
There are many ways to remove a brass ring from a copper pipe. One way is to use a hammer and chisel. Another way is to use a pipe wrench.
-copper pipe -masking tape -pencil -needle nose pliers -flat head screwdriver -brass ring
- File down any rough edges left from the sawing process
- Use a hacksaw to cut the brass ring off of the copper pipe
- Soak the copper pipe in vinegar for several hours
- Use a wire
-If the brass ring is too tight to remove by hand, try wrapping a piece of cloth around it and using a pair of pliers to grip the cloth tightly. -If the brass ring is corroded in place, try using a wire brush or sandpaper to remove the corrosion before trying to remove the ring. -If neither of these methods work, you may need to use a hacksaw to cut the ring off of the pipe.
Frequently Asked Questions
How Do You Remove A Compression Valve From A Copper Pipe?
One way to remove a compression valve from a copper pipe is to cut the pipe near the valve with a hacksaw and then use a wrench to unscrew the valve.
Do I Need To Remove Old Compression Ring?
No, there is no need to remove the old compression ring. In most cases, it can be left in place.
How Do You Change A Compression Shut Off Valve On A Copper Pipe?
Turn off the water supply to the valve. Cut the valve off using a pipe cutter. Twist the valve off using a pipe wrench. Replace the compression nut, sleeve, and washer. Turn on the water supply and check for leaks.
Summing-Up
Removing brass ring from copper pipe can be done in a few ways. One way is to use a hacksaw to cut the ring off, being careful not to cut into the copper pipe. Another way is to use a vise grips to grip the ring and twist it off.