If you have a Danze shower handle and it needs to be removed, you can use a screwdriver to remove the screws on the side of the handle. Once the screws are removed, you can then pull the handle off of the shower faucet.
How To Remove Danze Shower Handle
First, remove the showerhead by unscrewing it counterclockwise. If it’s stubborn, you may need to use a wrench. Next, remove the handle by unscrewing it counterclockwise. If it’s stuck, you can try using a wrench or pliers. Finally, remove the escutcheon plate by unscrewing it counterclockwise.
– Phillips head screwdriver – Flat head screwdriver – Pliers
- Lift the handle off its mount
- Unscrew and remove the retaining nut at the base of the shower arm with a wrench
- Remove the set screw at the base of the handle with a phillips head screwdriver
-To remove a Danze shower handle, you will need a screwdriver. -First, turn the water off to the shower by turning the valve in the wall. -Next, use the screwdriver to remove the screws on the handle. -Finally, pull the handle off of the shower faucet.
Frequently Asked Questions
How Do You Remove A Danze Bannockburn Shower Handle?
To remove the shower handle on a Danze Bannockburn faucet, you will need to first locate the Allen screw at the base of the handle. Use a hex key to loosen the screw, then pull the handle straight off. Be careful not to lose the washer that sits between the handle and the screw. If it becomes loose, you can place it back on the screw before replacing the handle.
How Do I Change The Cartridge In My Danze Shower?
There is a cartridge in the shower that you need to change in order to fix the shower.
How Do You Remove A Danze Shower Handle?
There are a few steps in removing a Danze shower handle. The first is to identify the screw that is holding the handle in place. This screw is usually located on the underside of the handle. Once the screw has been located, it can be removed by using a Phillips head screwdriver. With the screw removed, the handle can now be pulled off of the faucet.
Wrap-Up
Danze shower handles are held in place by screws that can be removed with a Phillips head screwdriver. The handle can then be pulled off the faucet. Reverse these steps to reattach the handle.