How To Remove Kwikset Deadbolt Without Screws

If you need to remove a Kwikset deadbolt without screws, the best way to do it is with a small screwdriver or a utility knife. First, insert the blade of the screwdriver or knife into the space between the door and the jamb. Next, twist the blade to pop the deadbolt out of the jamb. Finally, use a Phillips head screwdriver to remove the two screws that hold the deadbolt in place.

5 Steps to Remove Kwikset Deadbolt Without Screws

To remove a Kwikset deadbolt without screws, first remove the interior knob by unscrewing the two screws that hold it in place. Next, remove the exterior knob by unscrewing the two screws that hold it in place. Finally, use a screwdriver to remove the two screws that hold the deadbolt in place.

One of the most important things that you can learn is how to remove a kwikset deadbolt without screws. This is a very useful skill to have, because it can come in handy in a number of different situations. For example, if you ever need to change the batteries in your kwikset deadbolt, or if you need to replace the deadbolt itself, knowing how to remove it without screws can save you a lot of time and hassle. Additionally, if you ever find yourself in a situation where you need to get into a locked room or building, knowing how to remove a kwikset deadbolt without screws can give you the ability to do so quickly and easily.

Step 1: Remove Kwikset Deadbolt Without Screws

To remove a Kwikset deadbolt without screws, first remove the interior knob by unscrewing the two screws that hold it in place. Next, use a flathead screwdriver to remove the two screws that hold the deadbolt in place. Finally, use a hammer to lightly tap the deadbolt until it pops out of the door.

Step 2: Use A Flat Head Screwdriver

If you need to remove a Kwikset deadbolt without screws, you can use a flat head screwdriver to do so. First, insert the screwdriver into the hole in the center of the deadbolt. Then, turn the screwdriver clockwise until the deadbolt pops out.

Step 3: Pry Out The Decorative Cover On The Front Of The Bolt

To remove the decorative cover on the front of the bolt, use a flathead screwdriver to pry it off. Be careful not to damage the cover. Once the cover is off, you will be able to see the screws that hold the bolt in place. Use a Phillips head screwdriver to remove the screws and then pull the bolt out of the door.

Step 4: Insert The Screwdriver Into The Small Hole In The Center Of The Bolt And Turn It Counterclockwise

To remove a kwikset deadbolt without screws, first insert a screwdriver into the small hole in the center of the bolt. Then, turn the screwdriver counterclockwise until the bolt comes loose. Finally, pull the bolt out of the door.

Step 5: Pull The Bolt Out Of The Door

If the deadbolt is flush with the door, you may be able to remove it without screws. Look for a small hole near the center of the deadbolt. Insert a paperclip or other small object into the hole and push. The deadbolt should pop out of the door. If the deadbolt is recessed, you will need to remove the two screws that hold it in place.


Frequently Asked Questions

How Do You Remove A Kwikset Smart Deadbolt?

To remove a Kwikset Smart deadbolt, first remove the two screws that secure the deadbolt to the door. Then, insert a flathead screwdriver or another thin object into the slot on the side of the deadbolt and push down to release the retaining clip. Finally, pull the deadbolt out of the door.

How Do You Remove A Kwikset Deadbolt Without Visible Screws?

There are a few ways to remove a Kwikset deadbolt without visible screws. One way is to use a putty knife to pry off the decorative plate on the interior of the door. Once the plate is removed, you will be able to see the screws that hold the deadbolt in place. Another way is to remove the battery cover on the keypad and insert a small screwdriver or nail into the hole that is revealed. This will release the deadbolt so that it can be removed.

How Do You Remove A Double Keyed Deadbolt Without Visible Screws?

There is a small hole on the inside of the knob that allows for a release of the locking mechanism.

To Summarize

Removing a Kwikset deadbolt without screws is possible, but it requires a little bit of finesse. The first step is to insert a flathead screwdriver into the keyhole and twist it until the bolt pops out of the hole. Next, use a pair of pliers to grab the bolt and pull it out of the door.

Leave a Comment

Your email address will not be published. Required fields are marked *