How To Remove Swagelok Ferrule

The Swagelok ferrule is a stainless steel band that is crimped onto the end of a tubing to prevent it from slipping off the fitting. To remove the ferrule, use a bench vise to grip the tubing and fittings. Use a pair of pliers to twist the ferrule off.

How To Remove Swagelok Ferrule

Removing a Swagelok ferrule is a relatively simple process. The most important thing to remember is that the ferrule must be heated before it can be removed. There are several ways to heat the ferrule, but the most common is to use a propane torch. Once the ferrule is heated, it can be removed by using a pair of pliers. First, the pliers should be placed over the ferrule and then the user should twist them

-A pipe wrench -channel locks -penetrating oil -vinegar

  • Place the ferrule in a vise with the flared end facing up
  • Use a hacksaw to cut off the flared end of the ferrule
  • Use a file to remove any burrs or rough edges from the

below 1. Remove the swagelok ferrule from the tubing using a wrench. 2. Apply a lubricant to the ferrule and tubing. 3. Twist the ferrule off of the tubing.


Frequently Asked Questions

Can Swagelok Nuts Be Reused?

Yes, Swagelok nuts can be reused. They are made from a corrosion-resistant stainless steel that can withstand multiple uses.

Are Parker And Swagelok Fittings Interchangeable?

Yes, Parker and Swagelok fittings are interchangeable.

Is Gyrolok Compatible With Swagelok?

Gyrolok fittings are compatible with Swagelok fittings in most cases. However, the two brands do have some differences in their sizing, so it is always best to consult the specific product datasheets to confirm compatibility.


Taking Everything Into Account

Removing a Swagelok ferrule is not difficult, but it can be tricky if you do not have the appropriate tools. You will need a socket wrench and a hammer. Place the socket wrench over the ferrule and hit it with the hammer. This will loosen it so that you can remove it from the tubing.

Leave a Comment

Your email address will not be published. Required fields are marked *