How To Repair Paslode Finish Nailer

If your Paslode finish nailer isn’t working properly, you may be able to fix it yourself. Before you begin, however, be sure to read the owner’s manual thoroughly and understand the basic operation of the tool. Also, be aware that some repairs may require special tools or knowledge that you may not have. If your finish nailer is firing inconsistently, the first thing to check is the air filter. If it’s dirty, clean it or replace it as

How To Repair Paslode Finish Nailer

There are a few things that you can do to repair a Paslode finish nailer. The first step is to identify the problem. There are a few common problems that people experience with these tools, including jammed nails, misfiring nails, and low power. Once you have identified the problem, you can take steps to fix it. If the nails are jammed, you can try using a hammer to hit the nails out of the tool. If this does not work,

The tools and materials you will need to repair a Paslode finish nailer include a Phillips head screwdriver, a flathead screwdriver, a small hammer, pliers, wire cutters, and a replacement air filter.

  • Use a screwdriver to remove the screws from the housing of the finish nailer
  • Locate the two screws that hold the driver blade in place. remove these screws and set them aside
  • Pull the driver blade out

-Remove the jammed nails from the magazine and clear the jam. -Check the air pressure. The paslode finish nailer needs to have at least 70 psi of air pressure in order to function properly. -Make sure that the paslode finish nailer is properly lubricated. Apply a light coating of oil to the moving parts of the tool. Do not over-oil, as this can lead to misfires. -If the tool is not firing correctly,


Frequently Asked Questions

What Does Flashing Green Light Mean On Paslode Nail Gun?

The flashing green light on a Paslode nail gun usually indicates low battery power.

How Do You Take Apart A Paslode Nail Gun?

The first step is to remove the magazine. This can be accomplished by pushing on the rectangular button at the front of the gun and pulling it out. The nail gun can then be disassembled by unscrewing the four screws that hold the housing together. The screws are located at the front, back, and sides of the housing.

Why Is My Paslode Gun Flashing Green?

There could be a few reasons why your Paslode gun is flashing green. One possibility is that the battery is low and needs to be replaced. Another reason could be that there is a problem with the air filter and it needs to be cleaned or replaced.


To Summarize

The paslode finish nailer is a great tool to have for your home improvement projects. However, if it stops working properly, you may need to take it to a repair shop to get it fixed.

Leave a Comment

Your email address will not be published. Required fields are marked *