How To Replace Moen Faucet Cartridge 1224

Replacing the cartridge in a Moen faucet is a relatively easy process, and can be completed in about 15 minutes. The first step is to gather the necessary tools, which include a screwdriver, adjustable wrench, and cartridge puller. The next step is to turn off the water supply to the faucet, and then remove the handle by unscrewing the setscrew and pulling it off. The cartridge can then be removed by using the adjustable wrench to loosen the

How To Replace Moen Faucet Cartridge 1224

Moen faucet cartridge 1224 is used in single handle faucets. It can be replaced easily following these steps: 1) Shut off the water supply to the faucet by closing the valve under the sink. 2) Pry off the decorative cap on top of the faucet handle with a screwdriver. 3) Remove the handle screw and pull off the handle. 4) Loosen the cartridge retaining nut with a wrench

-Replacement Moen Cartridge -Philips head screwdriver -Channel locks -New cartridge

  • Remove the decorative cap from the top of the faucet handle
  • Open the faucet to release the pressure in the lines
  • Turn off the water supply by closing the shutoff valve under the sink

-Remove the handle by unscrewing it from the valve body -Unscrew the cartridge by turning it counterclockwise -Replace the old cartridge with the new one by screwing it in clockwise -Screw the handle back on to the valve body


Frequently Asked Questions

How Do You Change A Moen 1224 Cartridge?

The Moen 1224 cartridge is changed by unscrewing the cartridge from the faucet and replacing it with a new one.

How Do You Remove A Moen Cartridge Without The Tool?

One way to remove a Moen cartridge without the tool is by using a pair of pliers. Grip the cartridge and twist it until it comes loose.

How Do You Remove A Moen Nut Cartridge?

The best way to remove a Moen nut cartridge is to use a crescent wrench.

How Do You Remove A Moen 1224?

To remove a Moen 1224, one must first remove the handle. This can be done by unscrewing the handle screw and pulling the handle off. Next, the cartridge must be removed. This can be done by unscrewing the cartridge screw and pulling the cartridge out.

How Do You Remove A Moen Kitchen Faucet Nut?

There are a few ways to remove a Moen kitchen faucet nut. One way is to use a pipe wrench. Another way is to use a channel lock pliers. Another way is to use an adjustable wrench.

How Do You Remove A Moen Cartridge?

To remove a Moen cartridge, you’ll need a crescent wrench. Loosen the cartridge by turning it counterclockwise. Once it’s loose, pull it straight out. If the cartridge is stuck, you may need to use a screwdriver to help pry it out.

How Do You Remove A Shower Cartridge Without A Puller?

There is no one definitive answer to this question since it depends on the specific shower cartridge in question. However, some possible methods include using a screwdriver or pliers to remove the cartridge screws, prying the cartridge out with a screwdriver or chisel, or breaking the cartridge seal with a hammer and then pulling it out.

How Do I Remove A Stuck Moen 1222 Shower Cartridge?

To remove a stuck Moen 1222 shower cartridge, start by turning off the water supply to the shower. Next, use a wrench to remove the screws that hold the shower head in place. Once the screws are removed, pull the shower head off of the pipe. Finally, use a pliers to remove the cartridge from the pipe.

How Do You Remove A Moen Filter?

One way to remove a Moen filter is by using a screwdriver to loosen the filter from the faucet. Another way to remove a Moen filter is by using pliers to grip the filter and pull it off the faucet.


To Summarize

Replacing a Moen faucet cartridge is a fairly simple process that can be completed in about 10 minutes. First, turn off the water supply to the faucet and remove the handle by unscrewing it. Next, use a wrench to loosen the retaining nut on the cartridge and pull it out. Insert the new cartridge, reattach the handle, and turn on the water supply.

Leave a Comment

Your email address will not be published.