How To Reverse Water Meter Reading

There are many ways to read and calculate water meter readings, but one of the simplest and most accurate ways is to use a mathematical formula to reverse the reading. The steps are relatively simple: 1. Locate the water meter on your property and take a picture of it for reference. 2. Calculate the total cubic feet of water that have passed through the meter by multiplying the width of the meter by the depth of water and then dividing by 231. 3

How To Reverse Water Meter Reading

Water meters measure the amount of water used in a property. The meter is usually installed in the property boundary, near the road or footpath. Most water meters have a dial which records water usage in cubic meters or gallons. If you think you may have been billed for more water than you have used, it is worth checking your water meter reading against your bills to see if there is a discrepancy. If there is, you can ask your council to reverse the meter reading.

-A water meter -A Phillips head screwdriver -A wrench

  • Turn off all water in the house
  • Write down the current reading
  • Wait 1 hour take a reading of the water meter write down the new reading sub
  • Take a reading of the water meter

-Check if water meter reading is in clockwise or counterclockwise -If it is clockwise, turn the meter in the opposite direction -If it is counterclockwise, turn the meter in the same direction


Frequently Asked Questions

How Do Remote Read Water Meters Work?

The way that remote read water meters work is by having a sensor on the water meter that sends a signal to a receiver that is located somewhere in the area. This receiver then sends the reading of the water meter to a computer or system that records and tracks the water usage for the property.

How Do Meter Readers Read Meters?

Meter readers use a variety of techniques to read meters, depending on the type of meter. They may use a mirror to reflect the light from the meter to see the numbers, or they may use a special tool to unlock the meter and read the numbers inside.

Can A Magnet Stop A Water Meter?

A magnet will not stop a water meter.


To Review

The most efficient way to reverse water meter reading is to use a special tool that can be attached to the meter. The tool will then send a signal to the other device, which will in turn allow the user to see the meter reading on their screen.

Leave a Comment

Your email address will not be published.