There is no one definitive way to snake a urinal, but the general process is to remove the trap and clean out the clog with a plunger. If the clog is deep in the pipe, a wire coat hanger or other metal rod can be used to dislodge it.
How To Snake A Urinal
There is no one definitive way to snake a urinal. However, the following are some tips that may help: -Try using a plunger. This can often dislodge the blockage and allow the water to flow freely again. -If using a plunger doesn’t work, try pouring a pot of boiling water down the urinal. The heat may help to break up the blockage. -If pouring boiling water doesn’t work, you may
- Find the snake or auger at the hardware store feed the snake or auger through the drainage pipe turn on the faucet
- Look for the drainage pipe on the floor near the urinal
- Locate the urinal
-The best way to snake a urinal is to use a plunger. -If the plunger does not work, you can use a wire coat hanger. -If the wire coat hanger does not work, you can use a plumbing snake.
Frequently Asked Questions
What Is The Best Way To Unclog A Urinal?
There are a few ways that people have found to be effective at unclogging urinals. One is to pour water into the urinal and flush it out that way. Another is to pour baking soda into the urinal and then flush it out with water.
Can You Put Drano Down A Urinal?
Drano is an industrial strength cleaner that can be harmful if ingested. It is not recommended to put Drano down a urinal.
How Do You Unclog A Urinal Without A Plunger?
There are a few ways to unclog a urinal without a plunger. One way is to pour a pot of boiling water into the urinal. Another way is to pour a bucket of ice water into the urinal.
There are a few methods for snakeing a urinal. One is to use a plumbing snake, which can be inserted through the drain hole to clear any clogs. Another option is to pour boiling water down the drain to clear away any obstructions.