Cedar shingles are a popular roofing material because they are durable and look great. Over time, however, they may start to look a bit shabby. To keep your cedar shingles looking their best, you may need to trim them occasionally. Here is a guide on how to trim cedar shingles.
How To Trim Cedar Shingles
Cedar shingles can be trimmed with a razor blade, tin snips, or a circular saw. A razor blade is the most precise option and will give you a clean edge, but it requires more precision and care. Tin snips are a good option if you are trimming a large number of shingles, as they are easy to use and give a clean cut. Circular saws can also be used to trim cedar shingles, but be sure to use
a straight edge, utility knife, hammer, roofing nails, caulking gun
- Using a circular saw, cut the bottom of each shingle so that it is even with the edge of the roof
- Cut off any excess shingle at the top so that the shingle is the desired length
- Use a
below -Check for any cracked, chipped, or rotten shingles and replace them before trimming the rest of the shingles. -Using a straight edge, line up the shingles with the edge of the roof and trim them to fit. -If there is any excess shingle hanging over the roof edge, use a sharp blade to cut it off. Be careful not to cut into the roof sheathing.
Frequently Asked Questions
How Do You Cut Angles On Cedar Shingles?
There are a few ways to cut angles on cedar shingles. One way is to use a circular saw and set the blade to the desired angle. Another way is to use a miter saw and set the angle of the saw to match the desired angle of the shingle.
How Do You Start The First Row Of Cedar Shingles?
There are a few ways to start the first row of cedar shingles. One way is to measure and mark the height of the shingle on the edge of the roof. Another way is to place a shingle at the bottom of the roof and work your way up.
How Do You Trim A Cedar Shake?
There are a few ways to trim a cedar shake, but the most common is with a power saw.
Cedar shingles can be trimmed with a standard pair of household scissors. First, measure and mark the desired length of the shingle with a pencil. Then, cut along the marked line. Finally, use a file to smooth any rough edges.